Option menu items
Use the following table to configure playback settings of the unit.
- Available items vary depending on the selected input source.
- When the input icon is displayed on the upper right of the “Option” menu, the setting is applied to the currently selected input source. Otherwise, the setting is applied to all of the input sources.
- Text in parentheses denotes indicators on the front display.
- Depending on the region of purchase, some menu items for audio streaming services are also available.
Item | Function | Page | |
|---|---|---|---|
Tone Control (Tone Control) | Adjusts the level of high-frequency range and low-frequency range individually. | ||
YPAO Volume (YPAO Volume) | YPAO Volume (YPAO Vol.) | Enables/disables YPAO Volume. | |
Adaptive DRC (A.DRC) | Sets whether the dynamic range (from maximum to minimum) is automatically adjusted to the volume. | ||
Dialogue (Dialog) | Dialogue Level (Dialog Lvl) | Adjusts the volume of dialogue sounds. | |
DTS Dialogue Control (DTS Dialog) | Adjusts the volume of dialogue sounds for DTS:X contents. | ||
Dialogue Lift (Dialog Lift) | Adjusts the perceived height of dialogue sounds for the screen position. | ||
Lipsync (Lipsync) | Lipsync (Lipsync) | Adjusts the delay between video and audio output manually. | |
Enhancer (Enhancer) | Enhancer (Enhancer) | Enables/disables Compressed Music Enhancer. | |
Volume Trim (Volume Trim) | Input Trim (In.Trim) | Corrects volume differences between input sources. | |
Subwoofer Trim (SW.Trim) | Fine-adjusts the subwoofer volume. | ||
Extra Bass (Extra Bass) | Extra Bass (Extra Bass) | Enables/disables Extra Bass. | |
Video Processing (Video Process.) | Video Mode (V.M) | Enables/disables the video signal processing settings configured in the “Setup” menu. | |
Video Out (Video Out) | Video Out (V.Out) | Selects a video to be output with the selected audio source. | |
Shuffle / Repeat (Shuffle / Repeat) | Shuffle (Shuffle) | Configures the shuffle setting. | |
Repeat (Repeat) | Configures the repeat setting. | ||
FM Mode (FM Mode) | FM Mode (Mode) | Switches between “Stereo” and “Monaural” for FM radio reception. | |
Preset (Preset) | FM Auto Preset (AUTO) | Automatically registers FM radio stations with strong signals as presets. | |
Clear Preset (CLEAR) | Clears radio stations registered to preset numbers. | ||
Clear All Preset (CLEAR ALL) | Clears all the radio stations registered to preset numbers. | ||
Add to favorites (Add to Fav.) | Adds your favorite Internet radio station to the “Favorites” folder. | ||
Remove from favorites (RemovefromFav.) | Removes it from the “Favorites” folder. | ||
Init Scan (Init Scan) | (U.K., Europe, Russia and Australia models only) Performs an initial scan for DAB radio reception. | ||
Tune AID (Tune AID) | (U.K., Europe, Russia and Australia models only) Checks reception strength of each DAB channel label. | ||
On-screen Information | Displays the current status information. | ||
- Basic operation of the Option menu
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Checking the current status information