Performing an initial scan for DAB radio reception
(U.K., Europe, Russia and Australia models only)
Perform an initial scan for searching DAB radio stations.
Option menu
“Init Scan”
- Press TUNER to select “TUNER” as the input source.
- Press BAND to select the DAB band.
- Press OPTION.
- Use the cursor keys to select “Init Scan” and press ENTER.
- Press ENTER to start an initial scan.
- When the initial scan finishes, the unit automatically tunes into the first DAB radio station as stored in station order.
NOTE
- If you perform an initial scan again, the DAB radio stations currently registered to the preset numbers will be cleared.
- If no DAB radio stations are found by an initial scan, press ENTER to start an initial scan again.
Related links
- Basic operation of the Option menu
- Option menu items
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Checking reception strength of each DAB channel label
- Checking the current status information