Setting the use of ARC
Select whether to output TV audio to the speakers connected to the unit when “HDMI Control” is set to “On”.
Note
- For details on “HDMI Control” in the “Setup” menu, see the following:
Setup menu
“HDMI” > “ARC”
Settings
Off | Disables ARC. |
On | Enables ARC. |
Note
- You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers.
Related links
- Setting the use of HDMI Control
- Setting the output of HDMI audio from the TV speaker
- Setting the use of HDMI Standby Through
- Setting the use of 4K upscaling of the HDMI video signal
- Setting the version of HDCP used on the HDMI input jacks
- Setting the audio jack used for TV audio input
- Linking the standby modes of the unit and the TV
- Setting the use of SCENE link playback