Selecting the HDMI 4K signal format (4K MODE)
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit.
ADVANCED SETUP menu
“4K MODE”
Settings
MODE 1 | Inputs/outputs 4K signals shown in the following table. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select “MODE 2”. |
MODE 2 | Inputs/outputs 4K signals shown in the following table. |
Note
When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet.
Format
MODE 1 | MODE 2 | ||||||
|---|---|---|---|---|---|---|---|
8 bit | 10 bit | 12 bit | 8 bit | 10 bit | 12 bit | ||
4K/60, 50 Hz | RGB 4:4:4 | – | – | ||||
YCbCr 4:4:4 | – | – | |||||
YCbCr 4:2:2 | – | ||||||
YCbCr 4:2:0 | – | ||||||
4K/30, 25, 24 Hz | RGB 4:4:4 | – | |||||
YCbCr 4:4:4 | – | ||||||
YCbCr 4:2:2 | |||||||
Related links
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)