Setting up a wireless connection using the WPS button
You can easily set up a wireless connection with one push of the WPS button.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
- Use the cursor keys to select “WPS Button” and press ENTER.
- Read the on-screen description and push the WPS button on the wireless router (access point).
- When the connection process finishes, “Completed” appears on the front display.
- If “Not connected” appears, repeat from step 1 or try another connection method.
- This completes the network settings.
NOTE
- The unit may not connect to the wireless router (access point) using WEP as the encryption method. In this case, try another connection method.
- You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a wireless connection and then “Press WPS button on Access Point” appears on the front display, push the WPS button.
About WPS
- WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network.