Backuping and restoring all the settings (BKUP/RSTR)

Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory device using FAT16 or FAT32 format in advance.

ADVANCED SETUP menu

“BKUP/RSTR”

Settings

RSTR

Restores all the previous backuped settings.

BKUP

Backups all the settings.

  1. Connect the USB memory device to the USB jack on the front panel.
  1. To start the process, press STRAIGHT to select “BKUP” or “RSTR” and then press INFO on the front panel.
  1. Press INFO again after the confirmation message appears on the front display.
  1. When “Complete” appears on the front display, press z (power) to set the unit to standby mode and turn it on again.
  • If “Failed” appears on the front display, check the following and start the process again.

In case of “BKUP”:

  • You cannot overwrite save. When you save the settings repeatedly, please move the file in different folder.
  • The file is stored by the name of “MC_backup_(model name).dat” in the route of the USB memory device.

In case of “RSTR”:

  • Check that the file is stored in the route of the USB memory device.
NOTE
  • “RSTR” is effective after backuping all the settings.
  • Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be restored correctly.
  • The user information (such as account, password) is not saved.

Related links