Setting the use of Center Spread
Selects whether to spread the center channel signals to left and right when a 2-channel source is played. This setting is effective when “bDsur” is selected.
Setup menu
“Sound” > “DSP Parameter” > “Center Spread”
Settings
Off | Disables Center Spread. |
On | Enables Center Spread. |
NOTE
- If you feel the center sound is too strong, set this function to “On”.
- For details on the surround decoder, see the following:
Related links
- Adjusting the center localization (broadening effect) of the front sound field
- Setting the use of Monaural Mix
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Adjusting the volume of dialogue sound
- Adjusting the volume of dialogue sound during DTS:X™ playback
- Adjusting the perceived height of dialogue sound
- Setting the scale of the volume display
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the volume for Zone B in conjunction with the volume for Zone A