Backuping and restoring all the settings (BKUP/RSTR)
Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory device using FAT16 or FAT32 format in advance.
ADVANCED SETUP menu
“BKUP/RSTR”
Settings
BKUP | Backups all the settings. |
RSTR | Restores all the previous backuped settings. |
- Connect the USB memory device to the USB jack on the front panel.
- To start the process, press STRAIGHT to select “BKUP” or “RSTR” and then press INFO on the front panel.
- Press INFO again after the confirmation message appears on the front display.
- When “Complete” appears on the front display, press z (power) to set the unit to standby mode and turn it on again.
- If “Failed” appears on the front display, check the following and start the process again.
In case of “BKUP”:
- You cannot overwrite save. When you save the settings repeatedly, please move the file in different folder.
- The file is stored by the name of “MC_backup_(model name).dat” in the route of the USB memory device.
In case of “RSTR”:
- Check that the file is stored in the route of the USB memory device.
NOTE
- “RSTR” is effective after backuping all the settings.
- Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be restored correctly.
- The user information (such as account, password) is not saved.
Related links
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- Setting DTS Format Notification (DTS MODE)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)