Configuring HDMI audio output
Select the device from which audio input via the unit’s HDMI IN jack will be played when the HDMI control function is disabled. HDMI audio is output from this unit by default.
The unit (default) | Play HDMI audio input signal from the unit. |
TV | Play HDMI audio input signal from the TV. |
- Turn off the unit.
- Press and hold 3D SURROUND for at least five seconds.
- The HDMI audio output setting is changed.
Once the indicator has shown the HDMI audio output setting applied to the unit as follows, the unit will turn on.
NOTE
- When playing back HDMI audio input signal from the TV, the unit cannot be used to adjust volume. Use TV controls to adjust volume.
- For details on the HDMI control function, see the following:
- To configure HDMI audio output with the HDMI control function enabled, select the audio output device on the TV connected to the unit.
- HDMI video signals input to the HDMI IN jack of this unit are always output from the HDMI OUT (ARC) jack of the unit.
Related links
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression