Setting the audio input jack used for TV audio
Selects an audio input jack, which connected to TV audio output, of the unit.
When you switch the input source of the unit to “TV”, the playback of TV audio is as follows.
- Without eARC/ARC function: the TV audio is played back with the audio input jack set for TV audio in “TV Audio Input”.
- With eARC/ARC function: the TV audio is played back with eARC/ARC, regardless of setting in “TV Audio Input”.
When using ARC function, set “HDMI Control” and “ARC” in the “Setup” menu to “On”.
When using eARC function, you do not have to set the ARC function. “HDMI Control” is set if necessary.
Setup menu
“System” > “TV Audio Input”
Settings
AUDIO 1-4
NOTE
- You may need setting on the TV. Refer to the instruction manual for the TV.
RX-A4A