Setting the HDMI 4K/8K signal format
Selects the format of signals input/output at the unit when HDMI 4K/8K compatible TV and playback device are connected to the unit. This setting is applied separately to each HDMI input jack.
Setup menu
“HDMI” > “HDMI Video Format” > (HDMI input)
Settings
4K Mode 1 | Inputs/outputs 4K signals shown in the following table. |
4K Mode 2 | Inputs/outputs 4K signals shown in the following table. |
8K Mode | Inputs/outputs 4K/8K signals shown in the following table. |
Format
4K Mode 1 | 4K Mode 2 | 8K Mode | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
8-bit | 10-bit | 12-bit | 8-bit | 10-bit | 12-bit | 8-bit | 10-bit | 12-bit | ||
8K/60, 50 Hz | RGB 4:4:4 | – | – | ( | ||||||
YCbCr 4:4:4 | – | – | ( | |||||||
YCbCr 4:2:2 | – | – | ( | |||||||
YCbCr 4:2:0 | – | – | ( | – | ||||||
8K/30, 25, 24 Hz | RGB 4:4:4 | – | – | ( | ||||||
YCbCr 4:4:4 | – | – | ( | |||||||
YCbCr 4:2:2 | – | – | ( | |||||||
YCbCr 4:2:0 | – | – | ) | – | ||||||
4K/120, 100Hz | RGB 4:4:4 | – | – | ( | ||||||
YCbCr 4:4:4 | – | – | ( | |||||||
YCbCr 4:2:2 | – | – | ( | |||||||
YCbCr 4:2:0 | ) | – | – | ) | – | |||||
4K/60, 50 Hz | RGB 4:4:4 | ) | – | – | ) | |||||
YCbCr 4:4:4 | ) | – | – | ) | ||||||
YCbCr 4:2:2 | ) | – | ) | |||||||
YCbCr 4:2:0 | ) | ) | – | ) | – | |||||
4K/30, 25, 24 Hz | RGB 4:4:4 | ) | ) | – | ) | |||||
YCbCr 4:4:4 | ) | ) | – | ) | ||||||
YCbCr 4:2:2 | ) | ) | ) | |||||||
- *“)” means supported video format.
- *“(” means that only DSC (Display Stream Compression) video format is supported. DSC is a video compression technique standardized by VESA.
- Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select another format.
- When “8K Mode” is selected, use a Ultra High Speed HDMI Cable or Ultra High Speed HDMI Cable with Ethernet.
- When “4K Mode 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet.
RX-V4A