Setting the power to on/standby (Zone A)

Switch the power of Zone A between on and standby.

NOTE
  • Zone A is the room where the unit is installed.
  1. Set the zone switch to “ZONE A”.
  1. Press z.
  • Each time you press the key, you can switch the power of Zone A between on and standby.
NOTE
  • When you turn on the unit for the first time, the message regarding the network setup appears on the TV. If you use an iPhone, you can set up a wireless connection by following the on-screen instructions. Here, press RETURN on the remote control to proceed to the next procedure.