Setting the equalizer

Selects the type of equalizer to adjust the tone.

Setup menu

“Speaker” > “Equalizer” > “EQ Select”

Settings

GEQ

Adjusts the equalizer manually.

YPAO:Flat

Adjusts each speaker to achieve the same characteristics.

YPAO:Front

Adjusts each speaker to achieve the same characteristics as the front speakers.

YPAO:Natural

Adjusts each speaker to achieve the same characteristics with lowered high frequency range.

Off

Does not use the equalizer.

When selecting “GEQ”

  1. Select “Channel” and then select the desired speaker channel.
  1. Select the desired band (frequency) and adjust the gain.
  • Setting range
  • -6.0 dB to +6.0 dB
  1. Press SETUP.
  • This completes the settings.
NOTE
  • Test tone output helps you to adjust the equalizer while confirming its effect
  • “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the YPAO has been performed.
Related links