Pairing with a Different Device

Follow the steps below to pair with another Bluetooth device, or to try pairing with the same device again.

Note that this product cannot connect to more than one Bluetooth device at the same time. If this product is already connected to another Bluetooth device, disconnect it and then follow these steps.

[Search tag] #Q02 Pairing

  1. With earbuds (L) and (R) turned on, hold down the function key on earbud (L) and the + (plus) key on earbud (R) for about three seconds.
  • Either earbud (L) or (R) will be the primary earbud, and its indicator alternately flashes red and blue while you hear the message “Pairing.” This means that the earbud is in pairing standby mode.
  1. Activate Bluetooth on the Bluetooth device.
  • A list of Bluetooth devices that can be connected will be shown.
  1. Select this product from the list on your Bluetooth device.
  • Select the listing that reads “Yamaha...” and not the listing that reads “LE-Yamaha...”.
  • If successfully connected, you will hear the “Pairing Successful” and “Connected” audio messages in the earbud that is flashing red and blue. The indicator displays as shown below.
  • Earbud (L) and (R) connect automatically and are ready for use.
NOTE
  • Pairing standby mode will automatically end on this product after about two minutes. To pair again, start from step 1.
  • If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
  • Up to three Bluetooth devices can be registered with this product. If you pair a device beyond the maximum number, the information for device you first paired (the oldest pairing) will be deleted.
  • This product does not support multi-point connectivity (connection to multiple devices at the same time).
  • This product cannot be paired with devices that require a passkey when pairing as this feature is unsupported.
Related links