Setting menu list
You can configure the detailed functions of this product in the settings menu. The parameters you can configure are shown in the table below.
See “Operating the settings menu” for details on how to use this.
[Search tag] #Q01 Settings menu
- When you set the HP GAIN (LINE OUT GAIN) and switch from LO to HI (ATT to 0dB) during playback, this produces a loud volume that may cause hearing loss. Only change this setting after you have turned the volume all the way down.
No. | Parameter | Settings | Description | Page |
|---|---|---|---|---|
1 | DAC FILTER | FAST LINEAR | Selects the DAC filter. | |
SLOW LINEAR | ||||
FAST MINIMUM | ||||
SLOW MINIMUM | ||||
APODIZING FAST | ||||
HYBRID FAST | ||||
BRICKWALL | ||||
SHORT LATENCY | ||||
2 | DAC LOCK RANGE | LEVEL 1 | Adjusts the precision of the DAC. | |
LEVEL 2 | ||||
LEVEL 3 | ||||
3 | HP GAIN | HI | Sets the gain for the headphones. | |
LO | ||||
LINE OUT GAIN | 0dB | Sets the gain for LINE OUT output (when LINE OUT is selected as the output destination). | ||
ATT | ||||
4 | VOLUME LIMIT | OFF | Sets an upper limit for the volume. | |
ON | ||||
5 | INITIAL VOLUME | OFF | Sets the default volume used when the power is turned on. | |
MUTE | ||||
-70.0dB | ||||
-60.0dB | ||||
-50.0dB | ||||
-40.0dB | ||||
6 | LR BALANCE | L+10.0 dB to 0.0 dB to R+10.0 dB (in 0.5 dB steps) | Adjusts the left/right volume balance. | |
7 | AUTO POWER STDBY | OFF | Toggles the auto power standby on/off. | |
ON | ||||
8 | VERSION INFO | SYSTEM： | Shows the firmware version. | |
USB DAC： | ||||
9 | INITIALIZATION | CANCEL | Initializes all settings and restores this product to its factory default state. | |
EXECUTE |
- You may not be able to change this setting, or the setting may be disabled in some conditions. See the explanation of each menu parameter for details.
HA-L7A