Listening to audio from a Bluetooth® device

Audio content from a Bluetooth device can be played through the sound bar.

  1. Press BLUETOOTH to switch the input source to Bluetooth.
  • The sound bar enters the connection wait status, and the BLUETOOTH indicator flashes.
  1. On the Bluetooth device, enable the Bluetooth function.
  1. Select the sound bar on the Bluetooth device.
  • When the connection is established, the BLUETOOTH indicator on the sound bar stops flashing and starts glowing blue.
  1. Start playback on the Bluetooth device.
  • The sound bar will begin playing audio from the Bluetooth device.
NOTE
  • Enabling the Bluetooth standby function allows the sound bar to be turned on automatically when a connection operation is performed with a Bluetooth device.
  • If other Bluetooth devices have been connected before, the sound bar will connect to the last connected device when the input source is switched to Bluetooth.
  • The Bluetooth connection is terminated if one of the following operations is performed.
  • The Bluetooth function of the Bluetooth device is turned off.
  • BLUETOOTH on the sound bar’s remote control is held down for at least five seconds.
  • An input source other than Bluetooth is selected on the sound bar.
  • The sound bar is turned off.
  • Adjust the volume level of the Bluetooth device if necessary.
  • Perform Bluetooth device operations within 10 meters (33 ft) of the sound bar.
Related links

Switching Bluetooth devices for playback (multipoint connection)

The sound bar can be connected to two Bluetooth devices simultaneously. It is easy to switch between the Bluetooth devices for playback.

Perform the following procedures to switch between devices for playback.

  1. Stop playback on the Bluetooth device.
  1. Start playback on the other Bluetooth device.
  • Audio from the other Bluetooth device can be heard on the sound bar.
NOTE
  • When connecting a new Bluetooth device, disconnect the currently connected Bluetooth device and then connect the new device.