HY SLOT window

This window contains the following items.

a

HY CARD popup button

Press a button to open the HY CARD SELECT popup window, in which you can select a Dante-enabled HY card.

b

NETWORK popup button

Press this button to access the NETWORK popup window, in which you can make IP address settings. Normally, the IP address is obtained automatically, so it is not necessary to change the setting. Specify this manually as necessary.

AUTO (DHCP)... The. IP address is obtained automatically.

STATIC IP ......... The IP address is specified manually.

c

DANTE SETUP popup button

Press this button to access the DANTE SETUP popup window, in which you can make settings for Dante-enabled HY cards.

d

REFRESH button

Press this button to update the I/O rack information in the Dante audio network to its latest state.

e

DEVICE RACK USAGE indication

This shows the state of IO rack resource usage.

f

I/O rack select button

This indicates the I/O rack’s ID number, model name, and the number of inputs/outputs. When you press this, the DEVICE SELECT screen or DANTE I/O DEVICE screen appears, allowing you to mount an I/O rack.

g

DANTE INPUT PATCH button

When you press this, the DANTE PATCH popup window’s INPUT tab appears, allowing you to select the channels that will be input from the I/O rack to the Dante-enabled HY card.

h

DANTE OUTPUT PATCH button

When you press this button, the DANTE PATCH popup window’s OUTPUT tab appears, allowing you to select the channels that will be output from the Dante-enabled HY card to the I/O rack.

i

CLEAR ALL button

When you press this button, the mounted state of all displayed I/O racks is cleared.