MIDI/GPI window (MIDI SETUP page)

This screen contains the following items.

a

PORT/CH field

Enables you to specify the settings for the channel that transmit/receive MIDI messages.

• Tx CH.............................Press this button to access a popup window, in which you can select a MIDI channel that will transmit MIDI messages.

• Rx CH.............................Press this button to access a popup window, in which you can select a MIDI channel that will receive MIDI messages.

NOTE

  • The MIDI port setting is fixed to CONSOLE.

b

PROGRAM CHANGE field

Enables you to switch MIDI Program Change message transmission and reception on or off.

• Tx....................................Switches Program Change transmission on or off.

• Rx....................................Switches Program Change reception on or off.

• ECHO..............................Switches on or off echo output of Program Change messages. (If this function is on, Program Change messages received from an external device will be retransmitted without modification.)

c

PROGRAM CHANGE MODE field

Enables you to select the Program Change transmit/receive mode.

• SINGLE .........................If this button is on, Program Changes will be transmitted and received on a single MIDI channel (Single mode).

• MULTI.............................If this button is on, Program Changes will be transmitted/received on multiple MIDI channels (Multi mode).

• OMNI ..............................If this button is on, Program Changes on all MIDI channels will be received in Single mode. Multi mode transmission/reception and Single mode transmission are disabled.

• BANK ............................If this button is on, Bank Select messages can be transmitted and received in Single mode. (Bank Select messages switch the group of Program Change messages to be used.)

d

CONTROL CHANGE field

Enables you to switch MIDI Control Change message transmission and reception on or off.

• Tx.....................................Switches Control Change transmission on or off.

• Rx.....................................Switches Control Change reception on or off.

• ECHO.....................................Switches on or off echo output of Control Change messages. (If this function is on, Control Change messages received from an external device will be retransmitted without modification.)

e

OTHER COMMANDS (MTC/MMC) field

Switches on or off echo output of other MIDI messages. (If this function is on, other MIDI messages received from an external device will be retransmitted without modification.)