PY64-D screen

SRC button

Turns SRC on or off and displays the clock synchronization status.

Status indicator

• DANTE Device Locked
• The indicator is lit red if the DANTE Device Locked function is enabled, preventing the audio network settings of the Dante device from being changed.
• AES67 Mode
• The indicator is lit green if AES67 (audio network compatibility connection standard) mode is enabled.

SYSTEM/SYNC indicator

These indicators show the Dante operational status. Press this to display the messages. In patterns where a message is displayed, an error icon or information icon is displayed next to the indicator.

DANTE Control ID buttons

These buttons are linked to the ID setting on the Dante Setup screen of the console.

Secondary Port select buttons

Select the Dante audio network connection method: either the daisy chain connection used for simple systems with a small number of connected devices, or the redundant connection used when connecting multiple devices.

Cancel button

This cancels the temporarily edited content during the process of editing DANTE Control ID or Secondary Port.

Apply button

If you have edited the DANTE Control ID setting or the Secondary Port setting, the settings are applied when you press this button, and a dialog box appears for confirming the change.

Bit select button

For selecting either 24 bits or 32 bits as the bit rate of the Dante audio network.

Latency select buttons

For selecting from 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms for the latency of the Dante audio network.

Preferred Leader button

When set to ON, this increases the unit’s order of priority for being the leader within the Dante audio network.

Sync To External button

When this is set to ON, the unit will sync to the word clock supplied from the external clock source.

This button is automatically set to ON if the word clock supplied from the WORD CLOCK IN terminal or AES/EBU IN on the rear panel is used as the clock source.