Selecting a wireless connection method to a network

Once the soundbar is registered to the MusicCast network, the wireless (Wi-Fi) settings can be made at the same time using MusicCast Controller.

If you are not using a MusicCast Controller, select the connection method that suits your network environment.

  1. Press the ~ (Setup) key on the remote control.
  1. Select “Network”.
  1. Select “Network Connection”.
  1. Select “Wireless(Wi-Fi)”.
  • Use the link below to select a wireless connection method.
NOTE
  • It may not be possible to connect the sound bar to a wireless LAN router (an access point) if they are far apart. In such a case, install the sound bar and wireless LAN router (access point) close to each other.
Related links