Checking that the sound bar outputs audio

Play back content to check that audio is actually output.

Checking TV audio

Watch the TV connected to the sound bar to confirm that TV audio is being output from the sound bar. If TV audio is not output, press the INPUT key on the remote control to switch the input source to “TV”.

NOTE
  • If audio is being output from both the TV speakers and the sound bar, mute the TV speakers.
  • If you have AV devices connected to the TV, switch the input source to “TV” in the same way and check if audio is output from the sound bar.

Checking audio from AV devices

Play an AV device connected to the sound bar's HDMI IN jack and press the INPUT key on the remote control to switch the input source to “HDMI”.

Check that the sound bar outputs audio from the AV device.

NOTE
  • When an AV device is connected to the HDMI IN jack of the sound bar, the HDMI cable connecting the sound bar to the TV transmits the video signal from the AV device to the TV.
Next steps
  • If TRUE X SURROUND will not be used or set up later:
  • To use TRUE X SURROUND: