Warning messages from YPAO

If a warning message is displayed after the measurement, you can still apply the measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

TV screen
Front display

Warning message

Cause

Remedy

W-1:Out of Phase

(W-1:PHASE)

A speaker cable may be connected with the reverse polarity (+/-).

Check the cable connections (+/-) of the problem speaker.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable.

If the speaker is connected correctly:

Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message.

W-2:Over Distance

(W-2:DISTANCE)

A speaker is placed more than 24 m (80 ft) from the listening position.

Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position.

W-3:Level Error

(W-3:LEVEL)

There are significant volume differences between the speakers.

Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is any problem, exit YPAO, turn off the unit, and then reconnect speaker cable or correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible.

Note
Text in parentheses denotes indicators on the front display.