Enjoying audio using Bluetooth® speakers/headphones
You can enjoy audio played back on the unit using Bluetooth speakers/headphones.
Note
- Sounds will be also output from the speakers connected to the unit.
- You cannot play back music files stored on a Bluetooth device (such as smartphones).
- Use the input selection keys on the remote control to select an input source.
- Select an input source other than Bluetooth.
- Press SETUP.
- Use the cursor keys to select “Bluetooth” and press ENTER.
- Use the cursor keys to select “Transmitter” and then set to “On”.
- Use the cursor keys to select “Device Search” and press ENTER to search the Bluetooth devices.
- The list of Bluetooth devices is displayed.
- Use the cursor keys to select the Bluetooth speakers/headphones to be connected with the unit and press ENTER.
- When the connection process finishes, “Completed” appears and audio played back on the unit will be reproduced from the Bluetooth speakers/headphones.
Note
- If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing mode and then perform “Device Search” operation again.
- Press ENTER.
- This completes the settings.
Note
- To terminate the Bluetooth connection, perform one of the following operations.
- Perform the disconnect operation on the Bluetooth speakers/headphones.
- Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".