Setup menu items
Use the following table to configure various functions of the unit.
Menu | Item | Function | Page | |
|---|---|---|---|---|
Speaker | Configuration | Power Amp Assign | Selects a speaker system. | |
Subwoofer | Selects whether or not a subwoofer is connected. | |||
Front | Selects the size of the front speakers. | |||
Center | Selects whether or not a center speaker is connected and its size. | |||
Surround | Selects whether or not surround speakers are connected and their size. | |||
Crossover | Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. | |||
Subwoofer Phase | Sets the phase of the subwoofer. | |||
Extra Bass | Enables/disables Extra Bass. | |||
Virtual CINEMA FRONT | Enables/disables the front 5-channel speaker (Virtual CINEMA FRONT) configuration. | |||
Distance | Sets the distance between each speaker and the listening position. | |||
Level | Adjusts the volume of each speaker. | |||
Equalizer | Adjusts the tone with an equalizer. | |||
Test Tone | Enables/disables the test tone output. | |||
HDMI | HDMI Control | Enables/disables HDMI Control. | ||
Audio Output | Enables/disables audio output from a TV. | |||
Standby Through | Selects whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode. | |||
4K Upscaling | Enables/disables the upscaling function. | |||
HDCP Version | Selects the version of HDCP used on the HDMI input jacks. | |||
TV Audio Input | Selects an audio input jack of the unit to be used for TV audio input. | |||
Standby Sync | Selects whether to use HDMI control to link the standby behavior of the TV and the unit. | |||
ARC | Enables/disables ARC. | |||
SCENE | Enables/disables SCENE link playback. | |||
Sound | DSP Parameter | Panorama | Enables/disables the broadening effect of the front sound field. | |
Center Width | Adjusts the broadening effect of the center sound field. | |||
Dimension | Adjusts the difference in level between the front and surround sound fields. | |||
Center Image | Adjusts the center localization (broadening effect) of the front sound field. | |||
Monaural Mix | Enables/disables monaural sound output. | |||
Lipsync | Select | Selects the method to adjust the delay between video and audio output. | ||
Adjustment | Adjusts the delay between video and audio output manually. | |||
Dialogue | Dialogue Level | Adjusts the volume of dialogue sounds. | ||
Volume | Scale | Switches the scale of the volume display. | ||
Dynamic Range | Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. | |||
Max Volume | Sets the limit value of the volume. | |||
Initial Volume | Sets the initial volume for when this receiver is turned on. | |||
ZoneB Volume | Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. | |||
ECO | Auto Power Standby | Set the amount of time for the auto-standby function. | ||
ECO Mode | Enables/disables the eco mode (power saving mode). | |||
Function | Input Rename | Changes the input source name displayed on the front display. | ||
Input Skip | Set which input sources are skipped when operating the INPUT key. | |||
Dimmer | Adjusts the brightness of the front display. | |||
Memory Guard | Prevents accidental changes to the settings. | |||
Remote Color Key | Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control. | |||
Network | Information | Displays the network information of the unit. | ||
Network Connection | Selects the network connection method. | |||
IP Address | Configures the network parameters (such as IP address). | |||
MAC Address Filter | Sets the MAC address filter to limit access to the unit from other network devices. | |||
DMC Control | Selects whether to allow a Digital Media Controller (DMC) to control playback. | |||
Network Standby | Selects whether to enable/disable the function that turns on the unit from other network devices. | |||
Network Name | Edits the network name (the unit’s name on the network) displayed on other network devices. | |||
MusicCast Link Power Interlock | Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of other devices of the network. | |||
Network Update | Updates the firmware via the network. | |||
Bluetooth | Bluetooth | Enables/disables the Bluetooth functions. | ||
Audio Receive | Disconnect | Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. | ||
Bluetooth Standby | Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). | |||
Audio Send | Transmitter | Enables/disables the Bluetooth audio transmitter function. | ||
Device Search | Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. | |||
Language | Select an on-screen menu language. | |||