Setting the initial volume for when the unit is turned on
Sets the initial volume when the unit is turned on.
Setup menu
“Sound” > “Volume” > “Initial Volume”
Settings
Off | Sets the level to the volume level of the unit when it last entered standby mode. |
Mute | Sets the unit to mute the audio output. |
-80.0 dB to +16.5 dB (0.5 dB increments) [0.5 to 97.0 | Sets the level to the specified volume level. |
NOTE
- This setting works only when the volume level is set lower than “Max Volume”. For details on “Max Volume” in the “Setup” menu, see the following:
Related links
- Setting the broadening effect of the front sound field
- Adjusting the broadening effect of the center sound field
- Adjusting the difference in level between the front and surround sound fields
- Adjusting the center localization (broadening effect) of the front sound field
- Setting the use of Monaural Mix
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Adjusting the volume of dialogue sound
- Setting the scale of the volume display
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Adjusting the volume for Zone B in conjunction with the volume for Zone A