Assigning speaker configuration

If you use any of the following speaker configurations, perform the following procedure to configure the corresponding speaker settings manually before performing YPAO.

  • Using the bi-amp connection (playing back more high-quality sounds with bi-amp connections)
  • Using the Zone B speakers
  • Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT)
NOTE
  • For details on the speaker configurations, see the following:
  1. Press z (receiver power) to turn on the unit.
  1. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack).
NOTE
If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3.
  1. Press SETUP.
  1. Use the cursor keys to select “Speaker” and press ENTER.
  1. Use the cursor keys to select “Configuration” and press ENTER.
  1. Configure the corresponding speaker settings.
  • Using bi-amp connections or Zone B speakers, select your speaker system in “Power Amp Assign”. For details, see the following:
  • Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT), select “On” in “Virtual CINEMA FRONT”. For details, see the following:
  1. To exit from the menu, press SETUP.
  • This completes the speaker settings.

Related links