Setting the dynamic range adjustment method
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Setup menu
“Sound” > “Dynamic Range”
Settings
Maximum | Produces audio without adjusting the dynamic range. |
Standard | Optimizes the dynamic range for regular home use. |
Minimum/Auto | Sets the dynamic range for clear sound even at night or at low volumes. When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information. |
Related links
- Checking the current audio signal information
- Enabling Lipsync adjustment
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Selecting sound programs
- Adjusting the sound field effect level
- Adjusting the delay between the direct sound and presence sound field generation
- Adjusting the broadening effect of the presence sound field
- Adjusting the loss of the presence sound field
- Adjusting the decay time of the rear reverberant sound
- Adjusting the delay between the direct sound and reverberant sound generation
- Adjusting the volume of the reverberant sound
- Adjusting the delay between the direct sound and surround sound field generation
- Adjusting the broadening effect of the surround sound field
- Adjusting the loss of the surround sound field
- Adjusting the delay between the direct sound and surround back sound field generation
- Adjusting the broadening effect of the surround back sound field
- Adjusting the loss of the surround back sound field
- Selecting the surround decoder used in the program
- Setting the use of Center Spread
- Adjusting the center localization (broadening effect) of the front sound field
- Adjusting the entire volume for “7ch Stereo”
- Adjusting the front and rear volume balance for “7ch Stereo”
- Adjusting the left and right volume balance for “7ch Stereo”
- Adjusting the height volume balance using the presence speakers for “7ch Stereo”
- Setting the use of Monaural Mix for “7ch Stereo”
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the CINEMA DSP 3D effect level automatically
- Setting Virtual Surround Back Speaker (VSBS)