Setting the amount of time for the auto-standby function
Set the amount of time for the auto-standby function.
Setup menu
“System” > “ECO” > “Auto Power Standby”
Settings
Off | Does not set the unit to standby mode automatically. |
5 minutes, 20 minutes | Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time. |
2 hours, 4 hours, | Sets the unit to standby mode when you have not operated the unit for the specified time. |
NOTE
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display.
Related links
- Checking the system information on the unit
- Setting the on-screen menu language
- Combining audio of another input source with video of the current input source
- Setting input sources to be skipped when operating the INPUT key
- Automatically changing the input source names displayed on the front display
- Manually changing the input source names displayed on the front display
- Setting the use of Auto Play function
- Setting sound programs to skip when operating the PROGRAM key
- Setting the function for the PROGRAM key on the remote control
- Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control
- Adjusting the brightness of the front display
- Setting the scale of the volume display
- Setting the use of short messages on the TV
- Setting the image to be used as wallpaper on the TV
- Specifying the condition for the TRIGGER OUT jack to function
- Specifying the output level of the electronic signal transmitted with each input
- Switching the output level for electronic signal transmission manually
- Specifying the zone with which the TRIGGER OUT jack functions are synchronized
- Setting the use of the eco mode
- Preventing accidental changes to the settings
- Updating the firmware via the network