Setting the use of volume adjustments for Zone2 output
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable volume adjustments for Zone2.
Setup menu
“Multi Zone” > “Zone2” > “Volume”
Settings
Fixed | Disables volume adjustments for Zone2 output. |
Variable | Enables volume adjustments for Zone2 output. |
NOTE
- “Volume” is automatically set to “Variable” when “Power Amp Assign” is set to “7.1 +1Zone” or “5.1.2 +1Zone”. For details on “Power Amp Assign” in the “Setup” menu, see the following:
Related links
- Checking the Zone2 information
- Setting the Zone2 limit value of the volume
- Setting the Zone2 initial volume for when the unit is turned on
- Adjusting the time deviation in relation to the main zone
- Switching between stereo and monaural for Zone2 output
- Setting the use of Compressed Music Enhancer for Zone2 output
- Adjusting the tone for Zone2 output
- Setting the use of Extra Bass for Zone2 output
- Adjusting the volume balance for Zone2 output
- Renaming the zone name
- Setting the use of switching to the party mode on Zone2