Setting the Zone2 initial volume for when the unit is turned on
Sets the Zone2 initial volume for when the unit is turned on.
Setup menu
“Multi Zone” > “Zone2” > “Initial Volume”
Settings
Off | Sets the level at the volume level of the unit when it last entered standby mode. | |
On | Mute | Sets the unit to mute the audio output. |
-80.0 dB to +10.0 dB (0.5 dB increments) [0.5 to 90.5 (0.5 increments)] | Sets the level to the specified volume level. |
NOTE
- This setting is not available when “Volume” is set to “Fixed”. For details, see the following:
- This setting works only when the volume level is set lower than “Max Volume” in “Zone2”. For details, see the following:
- For details on the scale of the volume display (dB unit or numeric value), see the following:
Related links
- Checking the Zone2 information
- Setting the use of volume adjustments for Zone2 output
- Setting the Zone2 limit value of the volume
- Adjusting the time deviation in relation to the main zone
- Switching between stereo and monaural for Zone2 output
- Setting the use of Compressed Music Enhancer for Zone2 output
- Adjusting the tone for Zone2 output
- Setting the use of Extra Bass for Zone2 output
- Adjusting the volume balance for Zone2 output
- Renaming the zone name
- Setting the use of switching to the party mode on Zone2