Using a TV’s remote control to operate the unit (HDMI control)

The HDMI control function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control.

When the unit is connected to a TV via HDMI cable, the TV’s remote control can be used to perform the following operations.

Operations that can be controlled via the TV’s remote control

a

Turn on/off

Both the TV and the unit turn on/off at the same time.

b

Switch input sources

The unit's input source switches accordingly when the TV’s input source is switched.

For example, when a TV program is selected on the TV, the unit’s audio input source is switched to the HDMI OUT (ARC) jack using the ARC function or TV input jack.

And also, when a BD/DVD player is connected to the HDMI IN jack on the unit, the unit’s input source switches to HDMI when the BD/DVD player is selected with the TV’s remote control.

c

Switch the audio output device

The audio output device can be switched to the TV or this unit.

d

Adjust volume

The unit’s volume can be adjusted when the TV’s audio output is set to the unit.

NOTE
  • If you are unable to operate the unit with your TV’s remote control, configure the HDMI control function of your TV and the unit. For details, see the following:
  • The input source can be switched while the unit is off (HDMI signal pass-through).
  • The volume displays on the TV and unit may not be the same.