Basic procedure in zone

Basic procedure for playback in zone is as follows. The zone selected by the zone switch can be operated.

  1. Turn on the zone.
  1. Turn on the external devices connected to the unit.
  1. Use the input selection keys to select an input source.
  1. Start playback on the external device or select a radio station.
  1. Press VOLUME to adjust the volume.
NOTICE
  • To avoid unexpected noise, never play back DTS-CDs in Zone2/Zone3/Zone4.
NOTE
  • Only an HDMI input is available in Zone4.
  • You cannot select “NET”, “USB” and “Bluetooth” exclusively for each zone. For example, if you select “SERVER” for Zone2 when “USB” is selected for the Main zone, the input source for the Main zone also switches to “SERVER”.
  • The zone input automatically switches in conjunction with the input source selected in the Main zone when “Main Zone Sync” is selected as the Zone2 or Zone3 input.
  • To adjust the zone volume, press VOLUME or MUTE when using the unit’s internal amplifier.
  • Refer to the instruction manual for the external device.