7.2.2 +2Zone
The Zone function allows you to play back an input source in the room where the unit is installed and in other 2 rooms.
[Search tag]#Q01 Speaker systems
NOTE
- To use the Zone speaker system, the speaker configuration settings must be changed.
- You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the separate sounds, and so you can place them on the left/right or front/rear sides of the room. In this case, their layout settings must be changed.
- When using only one subwoofer, you can place it either in the left or right side.
- When Zone3 output is enabled, the surround back speakers in the Main zone do not output sound.
RX-A8A