5.2.4 Bi-Amp
You can connect the front speakers that support bi-amp connections. To enable the bi-amp function, configure the necessary speaker settings.
[Search tag]#Q01 Speaker systems
NOTICE
- Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. If you are not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. Refer to the instruction manual of the speakers for details.
NOTE
- You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the separate sounds, and so you can place them on the left/right or front/rear sides of the room. In this case, their layout settings must be changed.
- When using only one subwoofer, you can place it either in the left or right side.
RX-A8A