Setting the equalizer
Selects the type of equalizer to adjust the tone.
Setup menu
“Speaker” > “Equalizer” > “EQ Select”
Settings
PEQ | Applies the parametric equalizer values obtained by the YPAO measurement. |
GEQ | Adjusts the equalizer manually. |
Off | Does not use the equalizer. |
When selecting “GEQ”
- Select “Channel” and then select the desired speaker channel.
- Select the desired band (frequency) and adjust the gain.
- Setting range
- -6.0 dB to +6.0 dB
- Press SETUP.
- This completes the settings.
NOTE
- Test tone output helps you to adjust the equalizer while confirming its effect
- “PEQ” is available only when the YPAO has been performed.