1. TW-E3B
2. Bluetooth® Connectivity

Pairing with a Different Device

Follow the steps below to pair with another Bluetooth device, or to try pairing with the same device again. It's important to turn off both earphones (L, R) before doing this.

[Search tag] #Q02 Pairing

1. With the power on the earphones (L, R) turned on, keep pressing their function keys until their indicators light up red.

• The power will turn off.

2. Keep pressing the function key on earphone (R) until its indicator lights up as shown below.

• You will hear the “Pairing” audio message in earphone (R), and the earphone will enter pairing standby mode.

3. Activate Bluetooth on the Bluetooth device.

• A list of Bluetooth devices that can be connected will be shown.

4. Select this product from the list on your Bluetooth device.

• If a passkey is required when connecting, input “0000”.

• If successfully connected, you will hear the “Pairing Successful” audio message in the earphone. The earphone indicator lights up as shown below.

5. Hold down the function key on the earphone (L) for about two seconds, until its indicator lights blue.

• After this, the indicator lights up purple for one second, and the earphone is ready for use.

• When you see a message on your Bluetooth device to register (pair) earphone (L), follow the instructions to pair. The other earphone may be listed as “Headset,” depending on the Bluetooth device.