Making bi-wiring connections

Bi-wiring allows output to the speaker woofers (low frequency) and the tweeter/mid-range (mid to high-frequency) to be split and driven separately. Speakers compatible with bi-wiring are required for these connections.

  1. Remove the short bar or bridge attached to the jacks of the speakers.
  1. Connect the product and the speakers as illustrated.
  • The illustration shows connecting the left channel. Connect the right channel in the same way.
  • Swapping the connections between speaker jacks A and B is OK.
NOTE
  • If the system is connected with bi-wiring, turn ON both Speakers A and B by pressing the SPEAKERS A and SPEAKERS B keys when the power is ON.
  • Use speakers with an impedance of at least 4-ohm and that are compatible with bi-wiring connections.