Using the WPS button to make a wireless connection

Pressing the WPS button on your wireless LAN router is a simple way to configure a wireless connection.

Setup menu

Network” > “Connection” > “Wireless

  1. Select “WPS” with the cursor keys (q/w) and then press the ENTER key.
  1. Once “Connect[ENTER]” is shown on the front display, press the ENTER key.
  1. Once “Connecting” is shown on the front display, press the WPS button on the wireless LAN router (access point).
  • Once the connection is made, “Completed” is shown and the Wireless LAN indicator lights up on the front display.
  • If “Not connected” is displayed, either repeat the process from step 1 or try a different connection method.
  • This completes the wireless connection process.
NOTE
  • This product cannot connect to a wireless LAN router (access point) using the WEP encryption method. In such case, try a different connection method.
What is WPS?

WPS (Wi-Fi Protected Setup) is a standard developed by the Wi-Fi Alliance. WPS make it easy to set up a wireless network.