DNS client

1. Summary

This page is for configuring the DNS client settings.

2. Top page

This is the top page for the DNS client.

2.1. DNS client settings

  • Displays the DNS client settings.

  • The table items are explained below.

    • DNS client functions

      • Displays the settings for whether to enable or disable the DNS client function.

    • DNS server address

      • Displays the DNS server address settings used during inquiry for name resolution.

    • Default domain

      • Displays the default domain settings.

    • Search domain

      • Displays the search domain settings.

  • Displays (DHCP) as a suffix for DNS server address and domain obtained by DHCP client function.

  • Displays (DHCPv6) as a suffix for DNS server address and domain obtained by DHCPv6 client function.

  • Press the "Setting" button to access a page where you can configure the DNS client settings.

3. DNS client settings page

This page is for configuring the DNS client settings.
Enter the settings, and then press the "Confirm" button.
If there are no mistakes in the input content of the confirmation screen, press the "OK" button.

3.1. DNS client settings

  • DNS client functions

    • Select the operation for the DNS client function from the following options.

      • Enable

      • Disable

  • DNS server address

    • Specify the DNS server address.

    • For the server address, either an IPv4 address or an IPv6 address can be specified.

    • Up to three server addresses can be specified.

  • Default domain

    • Specify the default domain.

    • Up to 256 characters can be inputted.

  • Search domain

    • Specify the search domain.

    • Up to 256 characters can be inputted.

    • Up to six search domains can be specified.