Using this product with your computer

This explains the settings and operations to make when using this product with your Windows PC or Mac to hold Web meetings using Zoom, Skype, Teams, FaceTime or LINE. (Zoom, Skype, Teams, FaceTime and LINE are the names of apps.)

What you need

  • This product
  • Windows PC or Mac (on which the various apps to use are installed)
  • Headphones or earphones with a stereo mini-plug cable
  • USB cable (included)

Steps to follow

  1. Installing the driver (Windows only)
  • If you are using a Mac, no driver installation is required. Start from step 2.
  • If the driver hasn’t been installed yet, install by referring to “Getting ready to use this product” → “Connecting to your computer and configuring the settings (Windows)”.
  1. Connecting to your computer
  • Connect by referring to “Getting ready to use this product” → “Connecting to your computer and configuring the settings (Windows)/(Mac)”.
  1. Connect headphones or earphones
  • Connect your headphones or earphones to the headphones output jack.
  1. Connect the mic
  • Connect the mic to the channel 1 mic/line input jack.
  • Now that you’ve made these connections, configure the settings for this unit.
  1. Configure the settings for the AG
  • Make the settings for each switch on the front panel as follows.
  • Phantom [+48V] switch: on (when using a condenser mic)
  • Channel 1 [GAIN] knob, level knob, fader: as appropriate (see illustration)
  • [STREAMING OUT]: [INPUT MIX]
  • [MIX MINUS]: off
  1. Configure the settings for the app
  • Launch the app you’ll use to hold the Web meeting, open the device settings in the app and confirm that the sound input device and sound output device are both set to either [Yamaha AG03MK2] or [Yamaha AG06MK2].
  1. Adjust the headphone/earphone volume
  • Adjust the volume using the headphone [H] knob while speaking into the mic. Adjusting the volume using the headphone [H] knob has no effect on the volume of the livestreaming audio.
  1. Start the Web meeting.
  • Use the fader (only on the AG03K2) or the level knob to adjust the respective volumes.
  • Launch the livestreaming app and check the balance for the listeners.

Operations during the conversation

  • Muting your own voice
  • To interrupt the conversation, turn the MUTE button on (the LED lights up).
NOTE