DELAY COMPENSATION popup window

This screen contains the following items.
- By default, only the INPUT INSERTS button is turned on.
a | INPUT INSERTS COMPENSATE button Press this button to automatically compensate for the timing among channels by inserting a delay into each input channel. Due to this compensation, all input channel signals will be delayed by 112 samples. |
b | OUTPUT BUSES COMPENSATE button Press this button to automatically compensate for the delayed timing on each MIX/ST/MATRIX bus. Due to this compensation, output signals from the MIX buses will be delayed by 14 samples, and output signals from the STEREO buses will be delayed by 7 samples. If you use the compensation via this button along with the OUTPUT INSERTS COMPENSATE button, output signals from the MIX buses will be delayed by 336+14 samples; from the STEREO buses by 336+7 samples; and from the MATRIX buses by 336 samples. |
c | OUTPUT INSERTS COMPENSATE button Press this button to automatically compensate the timing among channels by inserting a delay into each output channel. Due to this compensation, output signals from the MIX buses will be delayed by 112 samples; from the STEREO buses by 224 samples; and from the MATRIX buses by 336 samples. |
sample | fs 44.1 kHz | fs 48kHz | fs 88.2kHz | fs 96kHz |
|---|---|---|---|---|
7 | 0.16msec | 0.15msec | 0.08msec | 0.07msec |
14 | 0.32msec | 0.29msec | 0.16msec | 0.15msec |
112 | 2.50msec | 2.30msec | 1.30msec | 1.20msec |
224 | 5.10msec | 4.70msec | 2.50msec | 2.30msec |
336 | 7.60msec | 7.00msec | 3.80msec | 3.50msec |
336+7 | 7.80msec | 7.10msec | 3.90msec | 3.60msec |
336+14 | 7.90msec | 7.30msec | 4.00msec | 3.60msec |
d | Latency values This area shows the latency values (msec) generated by the signal that is input to the DSP engine, passes through the input channel, and is output to the buses. A latency value increases as Delay Compensation is applied. The value also varies depending on the Fs (sampling rate).
|

