Setup menu items
Use the following table to configure various functions of the unit.
Menu | Item | Function | Page | |
|---|---|---|---|---|
Speaker | Power Amp Assign | Selects a speaker system. | ||
Configuration | Front | Selects the size of the front speakers. | ||
Center | Selects whether or not a center speaker is connected and its size. | |||
Surround | Selects whether or not surround speakers are connected and their size. | |||
Surround Back | Selects whether or not surround back speakers are connected and their size. | |||
Front Presence | Selects whether or not presence speakers are connected and their size. | |||
Subwoofer | Selects whether or not a subwoofer is connected. | |||
Distance | Sets the distance between each speaker and listening position. | |||
Level | Adjusts the volume of each speaker. | |||
Parametric EQ | Adjusts the tone with an equalizer. | |||
Test Tone | Enables/disables the test tone output. | |||
YPAO Result | Checks and Reloades the previous YPAO adjustments. | |||
Sound | Information | Displays information about the current audio signal. | ||
Lipsync | Delay Enable | Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select”. | ||
Auto/Manual Select | Selects the method to adjust the delay between video and audio output. | |||
Adjustment | Adjusts the delay between video and audio output manually. | |||
DSP Parameter | DSP Level | Adjusts the sound field effect level. | ||
Initial Delay | Adjusts the delay between the direct sound and presence sound field generation. | |||
Room Size | Adjusts the broadening effect of the presence sound field. | |||
Liveness | Adjusts the loss of the presence sound field. | |||
Reverb Time | Adjusts the decay time of the rear reverberant sound. | |||
Reverb Delay | Adjusts the delay between the direct sound and reverberant sound generation. | |||
Reverb Level | Adjusts the volume of the reverberant sound. | |||
Surround Initial Delay | Adjusts the delay between the direct sound and surround sound field generation. | |||
Surround Room Size | Adjusts the broadening effect of the surround sound field. | |||
Surround Liveness | Adjusts the loss of the surround sound field. | |||
Surround Back Initial Delay | Adjusts the delay between the direct sound and surround back sound field generation. | |||
Surround Back Room Size | Adjusts the broadening effect of the surround back sound field. | |||
Surround Back Liveness | Adjusts the loss of the surround back sound field. | |||
Surround Decoder | Decode Type | Selects a surround decoder to be used. | ||
Center Spread | Selects whether to spread the center channel signals to left and right when 2-channel source is played. | |||
Center Image | Adjusts the center localization (broadening effect) of the front sound field. | |||
7ch Stereo | Level | Adjusts the entire volume for “7ch Stereo”. | ||
Front / Rear Balance | Adjusts the front and rear volume balance for “7ch Stereo”. | |||
Left / Right Balance | Adjusts the left and right volume balance for “7ch Stereo”. | |||
Height Balance | Adjusts the height volume balance using the presence speakers for “7ch Stereo”. | |||
Monaural Mix | Enables/disables monaural sound output for “7ch Stereo”. | |||
Dynamic Range | Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. | |||
Volume | Max Volume | Sets the limit value of the volume. | ||
Initial Volume | Sets the initial volume for when this receiver is turned on. | |||
Adaptive DSP Level | Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. | |||
Virtual Speaker | VSBS | Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. | ||
Scene | Scene Setting | Selects items to be included as the scene assignments. | ||
Scene Rename | Renames the scene name displayed on the front display or TV screen. | |||
Video/HDMI | Information | Displays information about the current video signal and the TVs connected to the HDMI OUT jacks. | ||
Video Mode | Video Mode | Enables/disables the video signal processing. | ||
Resolution | Selects a resolution to output HDMI video signals. | |||
Aspect | Selects an aspect ratio to output HDMI video signals. | |||
HDMI Control | HDMI Control | Enables/disables HDMI Control. | ||
TV Audio Input | Selects an audio input jack of the unit to be used for TV audio input. | |||
ARC | Enables/disables ARC. | |||
Standby Sync | Selects whether to use HDMI control to link the standby behavior of the TV and the unit. | |||
HDMI Audio Output | Enables/disables the audio output from a TV. | |||
HDCP Version | Selects the version of HDCP used on the HDMI input jacks. | |||
HDMI Standby Through | Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. | |||
Network | Information | Displays the network information on the unit. | ||
Network Connection | Selects the network connection method. | |||
IP Address | Configures the network parameters (such as IP address). | |||
Network Standby | Selects whether to enable/disable the function that turns on the unit from other network devices. | |||
MAC Address Filter | Filter | Sets the MAC address filter to limit access to the unit from other network devices. | ||
MAC Address | Sets the MAC address of the network device that is permitted to access the unit. | |||
DMC Control | Selects whether to allow a Digital Media Controller (DMC) to control playback. | |||
AirPlay Volume Interlock | Enables/disables volume controls from iTunes/iPhone via AirPlay. | |||
Network Name | Edits the network name (the unit’s name on the network) displayed on other network devices. | |||
MusicCast Link Power Interlock | Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of other devices of the network. | |||
Bluetooth | Bluetooth | Enables/disables the Bluetooth functions. | ||
Audio Receive | Disconnect | Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. | ||
Bluetooth Standby | Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). | |||
Audio Send | Transmitter | Enables/disables the Bluetooth audio transmitter function. | ||
Device Search | Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. | |||
Multi Zone | Information | Displays information about Zone2. | ||
Zone2 | Volume | Enables/disables volume adjustments for Zone2 output. | ||
Max Volume | Sets the Zone2 limit value of the volumes. | |||
Initial Volume | Sets the Zone2 initial volume for when the unit is turned on. | |||
Audio Delay | Adjusts the audio output timing for Zone2. | |||
Monaural | Switches between stereo and monaural for Zone2 output. | |||
Enhancer | Enables/disables Compressed Music Enhancer for Zone2 output. | |||
Tone Control | Adjusts the level of high-frequency range and low-frequency range for Zone2 output. | |||
Extra Bass | Enables/disables Extra Bass for Zone2 output. | |||
Left / Right Balance | Adjusts the volume balance for Zone2 output. | |||
Zone Rename | Changes the zone name displayed on the TV screen. | |||
Party Mode Set | Target : Zone2 | Enables/disables switching to the party mode. | ||
System | Information | Displays the system information on the unit. | ||
Language | Selects an on-screen menu language. | |||
Audio In | Combines the video jack of the selected input source with an audio jack of others. | |||
Input Skip | Sets which input source is skipped when operating the INPUT key. | |||
Input Rename | Changes the input source name displayed on the front display. | |||
Auto Play | Enables/disables Auto Play function in streaming services, Internet radio, media servers (PCs/NAS), Bluetooth and USB. | |||
DSP Skip | Sets which sound programs are skipped when operating the PROGRAM key. | |||
Remote Key | PROGRAM Key | Sets the function for the PROGRAM key on the remote control. | ||
Color Key | Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. | |||
Display Set | Dimmer (Front Display) | Adjusts the brightness of the front display. | ||
Volume | Switches the scale of the volume display. | |||
Short Message | Selects whether to display short messages on the TV screen when the unit is operated. | |||
Wallpaper | Selects the image to be used as wallpaper on the TV screen. | |||
Trigger Output | Trigger Mode | Specifies the condition for the TRIGGER OUT jack to function. | ||
Target Zone | Specifies the zone with which the TRIGGER OUT jack functions are synchronized. | |||
ECO | Auto Power Standby | Sets the amount of time for the auto-standby function. | ||
ECO Mode | Enables/disables the eco mode (power saving mode). | |||
Memory Guard | Prevents accidental changes to the settings. | |||
Firmware Update | Updates the firmware via the network. | |||