Receiving traffic information automatically
(U.K., Europe, Russia and Middle East models only)
When “TUNER” is selected as the input source, the unit automatically searches for a traffic information station.
Option menu
“Traffic Program”
- When “TUNER” is selected as the input source, press OPTION.
- Use the cursor keys to select “Traffic Program” and press ENTER.
- The traffic information station search will start in 5 seconds. Press ENTER again to start the search immediately.
NOTE
- To search upward/downward from the current frequency, press the cursor keys while “READY” is displayed.
- To cancel the search, press RETURN.
- The following screen appears for about 3 seconds when the search finishes.
NOTE
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
Related links
- Basic operation of the Option menu
- Option menu items
- Switching the input source
- Adjusting the tone of the audio output
- Configuring DSP/Surround
- Correcting volume differences during playback
- Enabling Lipsync adjustment
- Checking information about the video/audio signals
- Combining audio of another input source with video of the current input source
- Selecting a video source to be output with the selected audio source
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Configuring the shuffle setting
- Configuring the repeat setting
- Enabling volume control via AirPlay
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label