Setting your speaker system
Select the setting according to the speakers that are connected.
Setup menu
“Speaker” > “Configuration” > “Power Amp Assign”
Settings
Presence | Select this option when you use presence speakers in the 5.1.2 system. |
Sur.Back | Select this option when you use a normal speaker system (not using the presence speakers, Zone B speakers or bi-amp connections). |
BI-AMP | Select this option when you connect front speakers that support bi-amp connections. |
Zone B | Select this option when you use Zone B speakers in addition to the speaker system in the main zone (Zone A). |
5.1ch | Select this option when you don't use the SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals. |
NOTE
- For details on the speaker system, see the following:
Related links
- Setting the use of a subwoofer
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the phase of the subwoofer
- Setting the use of Extra Bass
- Setting the use of Virtual CINEMA FRONT
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones