Setting the use of presence speakers and their size
Selects the setting according to the use and size of your presence speakers when “Power Amp Assign” in the “Setup” menu is set to “Presence”.
Setup menu
“Speaker” > “Configuration” > “Presence”
NOTE
- For details on “Power Amp Assign” in the “Setup” menu, see the following:
Settings
Small | Select this option for small speakers. The subwoofer or front speakers will produce presence channel low-frequency components (configurable in “Crossover”). |
Large | Select this option for large speakers. The presence speakers will produce all of the presence channel frequency components. |
None | Select this option when no presence speakers are connected. The front speakers will produce presence channel audio. |
NOTE
- When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
Related links
- Setting your speaker system
- Setting the use of a subwoofer
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the use of surround back speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the phase of the subwoofer
- Setting the use of Extra Bass
- Setting the use of Virtual CINEMA FRONT
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones