Setting the equalizer
Selects the type of equalizer to be used and adjusts the tone.
Setup menu
“Speaker” > “Equalizer” > “EQ Select”
Settings
PEQ | Applies the parametric equalizer values obtained by the YPAO measurement. |
GEQ | Select this option when you want to adjust the equalizer manually. |
Off | Does not use the equalizer. |
When selecting “GEQ”
- Use the cursor keys to select “Channel” and to select the desired speaker channel.
- Use the cursor keys to select the desired band (frequency) and to adjust the gain.
- Setting range
- -6.0 dB to +6.0 dB
- Press SETUP.
- This completes the settings.
NOTE
- Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following:
- “PEQ” is available only when the YPAO has been performed. For details on the YPAO, see the following:
Related links
- Setting your speaker system
- Setting the use of a subwoofer
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the phase of the subwoofer
- Setting the use of Extra Bass
- Setting the use of Virtual CINEMA FRONT
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Outputting test tones