Setting the use of HDMI Standby Through
Select whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
NOTE
If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–5) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks).
Setup menu
“Video/HDMI” > “HDMI Standby Through”
Settings
Off | Does not output video/audio to the TV. |
Auto | Automatically selects whether to output video/audio depending on the status of the connected device. |
On | Outputs video/audio to the TV. |
NOTE
- “Off” is not selectable when “HDMI Control” is set to “On”.
- For details on “HDMI Control” in the “Setup” menu, see the following:
Related links
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks