Setting a resolution to output HDMI video signals
Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”.
NOTE
- For details on “Video Mode” in the “Setup” menu, see the following:
Setup menu
“Video/HDMI” > “Video Mode” > “Resolution”
Settings
Through | Does not convert the resolution. |
Auto | Selects a resolution automatically in accordance with TV resolution. |
480p/576p, 720p, 1080i, 1080p, 4K | Output video signals with a selected resolution. (Only the resolutions supported by your TV are selectable.) |
NOTE
- If you need to select a resolution that is not supported by your TV, set “MON.CHK” in the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV normally.) For details, see the following:
Related links
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through