Setting the use of ARC
Select whether to output TV audio to the speakers connected to the unit when “HDMI Control” is set to “On”.
NOTE
- For details on “HDMI Control” in the “Setup” menu, see the following:
Setup menu
“Video/HDMI” > “HDMI Control” > “ARC”
Settings
Off | Disables ARC. |
On | Enables ARC. |
NOTE
- You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers.
Related links
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through