RX-A2A | CONFIGURATIONS

CONFIGURATIONS

Option menu items

Configuring the volume automatically based on the YPAO measurement results

Adjusting the high- and low-frequency levels automatically according to the volume

Adjusting the dynamic range automatically

Configuring DSP/Surround

Adjusting the sound field effect level automatically

Setting Compressed Music Enhancer

Correcting volume differences during playback

Correcting volume differences between input sources
Adjusting the subwoofer volume

Enabling Lipsync adjustment

Checking the audio signal information

Checking the video signal information

Combining an audio input jack with a HDMI input jack

Selecting a video source to be displayed with the selected audio source

Setting the use of Auto Play function

Configuring the shuffle setting

Configuring the repeat setting

Setting the use of volume control via AirPlay/Bluetooth

Adding a “NET RADIO” radio station to the “Favorites” folder

Removing a radio station from the “Favorites” folder

Setup menu items

Speaker Settings
HDMI Settings
Sound Settings
Scene Settings
Multi Zone Settings
Function Settings
Network Settings
Bluetooth Settings
Language Setting

Configuring the speaker settings

Setting your speaker system
Setting the use of a subwoofer
Setting the use of each speaker and its size
Setting the layout of the front presence speakers
Setting the crossover frequency of the low-frequency components
Setting the phase of the subwoofer
Setting the use of Extra Bass
Setting the use of Virtual CINEMA FRONT
Setting the distance between each speaker and the listening position
Adjusting the volume of each speaker
Setting the equalizer
Setting the speaker impedance
Outputting test tones

Configuring the HDMI settings

Setting the use of HDMI Control
Setting the output of HDMI audio to the TV's speakers
Setting the use of HDMI Standby Through
Setting the use of 4K upscaling of the HDMI video signal
Setting the version of HDCP used on the HDMI input jacks
Linking the standby modes of the unit and the TV
Setting the use of ARC
Setting the HDMI 4K/8K signal format

Configuring the sound settings

Adjusting the tone of the audio output
Adjusting the sound field effect level
Selecting the surround decoder used in the program
Adjusting the center localization (broadening effect) of the front sound field
Adjusting the entire volume
Adjusting the front and rear volume balance
Adjusting the left and right volume balance
Adjusting the height volume balance
Setting the use of Monaural Mix
Setting the adjustment method of the Lipsync function
Adjusting the delay of the Lipsync function
Adjusting the volume of dialogue sound
Adjusting the volume of dialogue sound during DTS:X™ playback
Adjusting the perceived height of dialogue sound
Setting the dynamic range adjustment method
Setting the limit value of the volume
Setting the initial volume for when the unit is turned on
Setting Virtual Surround Back Speaker (VSBS)
Setting Dolby Speaker Virtualization
Setting DTS Format Notification

Configuring the scene settings

Selecting items to be included as the scene assignments
Renaming the SCENE name

Configuring the multi zone settings

Checking the zone information
Setting the use of volume adjustments for zone output
Setting the zone upper limit of the volume
Setting the zone initial volume for when the unit is turned on
Adjusting the volume balance for zone output
Setting the use of monaural sounds for zone output
Setting the use of Compressed Music Enhancer for zone output
Setting the use of Extra Bass for zone output
Adjusting the tone for zone output
Adjusting the time deviation in relation to the Main zone
Setting the use of switching to the party mode on zone
Renaming the zone name

Configuring the function settings

Automatically setting the input source names
Manually setting the input source names
Setting input sources to be skipped when operating the INPUT key
Setting the audio input jack used for TV audio
Setting sound programs to be skipped when operating the PROGRAM keys
Specifying the condition for the TRIGGER OUT jack to function
Specifying the output level of the electronic signal transmitted with each input
Switching the output level for electronic signal transmission manually
Specifying the zone with which the TRIGGER OUT jack functions are synchronized
Adjusting the brightness of the front display
Setting the scale of the volume display
Setting the use of short messages on the TV
Setting the position of short messages
Setting the operation sound
Setting the functions for the color keys on the remote control
Preventing accidental changes to the settings
Setting the amount of time for the auto-standby function
Setting the use of the eco mode
Changing the FM/AM tuning frequency setting
Restoring the default settings
Backing up and restoring all the settings
Updating the firmware

Configuring the network settings

Checking the network information of the unit
Setting the network connection method (Wired/Wireless)
Setting the network parameters automatically (DHCP)
Setting the network parameters manually
Setting the use of a Digital Media Controller
Setting the use of the Network Standby function
Setting the network name of the unit
Setting the power interlock from the unit to MusicCast compatible devices

Configuring the Bluetooth^® settings

Setting the use of Bluetooth^®
Terminating the connection between a Bluetooth^® device and the unit
Setting the use of the Bluetooth^® Standby function
Setting the use of audio transmission to a Bluetooth^® device
Connecting the unit to a Bluetooth^® device that receives transmitted audio

Configuring the language settings

Setting the menu language

Front Display menu items

Adjusting the brightness of the front display

Setting the power of each zone to on/standby

Setting the use of the volume on the front panel

Setting the use of the input selector on the front panel

Setting the use of the scene key on the front panel

Setting the use of the operation sound

Setting the use of the remote control

Selecting the remote control ID

Setting information items to be skipped when operating SELECT/ENTER

Restoring the default settings

Backing up and restoring all the settings

Updating the firmware

Setting the use of Retail Demo Mode

BEFORE USING THE UNIT

FEATURES

PART NAMES AND FUNCTIONS

PREPARATIONS

ENJOYING SOUND

PLAYBACK

USEFUL FUNCTIONS

ENJOYING IN MULTIPLE ROOMS (ZONES)

CONFIGURATIONS

UPDATE

TROUBLESHOOTING

APPENDIX